top of page
UCT 211
Dimensions
Shaft diameter55 mm
Housing overall width64 mm
Bearing width, total55.6 mm
Performance
Basic dynamic load rating43.6 kN
Basic static load rating29 kN
Limiting speed3 000 r/min
NoteLimiting speed with shaft tolerance h6
Properties
Housing typeTake-up
Retaining feature, inner ringSet screws
Bore typeCylindrical
Rubber seating ringWithout
Material, housingCast iron
Material, bearingBearing steel
CoatingWithout
Sealing, bearingSeal and flinger on both sides
Sealing typeContact, standard
Sealing, unitOptional end cover
LubricantGrease
Relubrication holeWith
Grease fittingWith
Logistics

UCT 211

₹1,250.00Price
Quantity
  • Compliance with standard

    JIS
    Purpose specific

    For material handling applications
    Material, housing

    Cast iron
    Sealing, bearing

    Seal and flinger on both sides
    Sealing type, bearing

    Contact, standard
    Sealing, unit

    Optional end cover
    Coating

    Without

    Dimensions

    d

    55 mm

    		 Bore diameter
    d1

    ≈70 mm

    		 Shoulder diameter of inner ring
    A

    64 mm

    		 Overall width
    A1

    22 mm

    		 Width of piloting groove
    A2

    38 mm

    		 Width of flange in which piloting grooves are provided
    A5

    37.5 mm

    		 Standout of end cover
    B

    55.6 mm

    		 Width of inner ring
    B4

    9.5 mm

    		 Distance from locking device side face to thread centre
    H

    146 mm

    		 Overall height
    H1

    130 mm

    		 Distance between bottoms of piloting grooves
    H2

    102 mm

    		 Height of attachment end
    L

    172 mm

    		 Overall length
    L1

    106 mm

    		 Distance from attachment end face to centre line of spherical seat diameter
    L2

    19 mm

    		 Length attachment end
    L3

    95 mm

    		 Length of piloting groove
    N

    35 mm

    		 Diameter of attachment bolt hole
    N1

    25 mm

    		 Length of attachment slot
    N2

    64.5 mm

    		 Height of attachment slot
    s1

    33.4 mm

    		 Distance from locking device side face to raceway centre
    Threaded hole
    RG

    1/8-27 NPT

    		 Housing thread for the grease fitting
    R1

    4 mm

    		 Axial position of the housing thread
    Rα

    30 °

    		 Angular position of the housing thread
    Grease fitting
    DN

    6.589 mm

    		 Diameter of head sphere of grease fitting
    SWN

    11.11 mm

    		 Hexagonal key size for the grease fitting
    GN

    1/8-27 NPT

    		 Thread of grease fitting

    Calculation data

    Basic dynamic load rating C

    43.6 kN
    Basic static load rating C0

    29 kN
    Fatigue load limit Pu

    1.25 kN
    Limiting speed  

    3 000 r/min
       

    Limiting speed with shaft tolerance h6

    Mounting information

    Set screw G2

    M10x1.25
    Hexagonal key size for set screw  

    5.08 mm
    Recommended tightening torque for set screw  

    16.5 N·m
bottom of page